![]() Provide the information for your time zone. You can find out which time zones are available by looking in the directory /usr/share/zoneinfo/ and its sub-directories. If you are in Spain, for example, the contents of that file should be ‘ Europe/Madrid‘ (without the quotes). Specify your time zone in the file /etc/timezone. If your installation uses the OpenRC init system To configure your time zone and clocks correctly, follow the steps below. I recommend that you read the manual for the hwclock command, as it explains in detail about clocks in Linux: # man hwclock ![]() The system clock is normally set from the hardware clock when the operating system boots, taking into account various configuration options. ‘system clock’ is the software clock the operating system uses. Some terms you need to know: ‘hardware clock’, ‘RTC’ (real-time clock), ‘CMOS clock’ and ‘BIOS clock’ are terms commonly used for the same thing. Force Windows 8 to use UTC when dealing with BIOS clock). * A change to the Windows Registry is required in order to enable Windows to use UTC for hardware clock time, but even then you may still face problems (see e.g. ![]() The most common cause is incorrect configuration, although dual booting with Windows will also change the Linux system clock’s time unless either a) Linux is configured to use local time for the hardware clock, or b) Windows is configured to use UTC * and Windows’ time synchronisation with an Internet time server is disabled. Typically the problem is that it displays UTC instead of local time. A problem often reported by users in Linux forums is that the time displayed by the system clock is incorrect.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |